LoadMaxx Tractor Scale Kit


Description:

Price:

Single leveling valve

950.00

Dual leveling valves

1,125.00

LoadMaxx works on tractors with air drive suspensions and most trucks with leaf spring steer axles and air suspension drive axles. Air pressure sensors measure pressure in the air springs, and deflection sensors measure flex for axles with leaf spring suspensions. The scale converts the sensor measurements into accurate on-the-ground weights.  Properly calibrated and used, LoadMaxx is accurate to within 300 lbs on each axle group

LoadMaxx Trailer Scale Kit


Description:

Price:

Nose mount – all types

895.00

Side mount – refers and vans

820.00

Side mount – flatbeds and bulk

815.00

Rear mount – bulk

795.00

Inside frame rail mount - lowbed

790.00

Mounting bracket – flatbeds, lowboys

51.70

Mounting bracket – all others

38.10

The LoadMaxx Trailer Scale works on air-ride equipped trailers with single or dual leveling valves. It converts pressure in the air springs into a very accurate on-the-ground weight. The heavier the load, the more air pressure is required to maintain ride-height. Once calibrated, the trailer scale displays the axle group weight to within 300 lbs of a certified scale.

LoadMaxx Truck Scale Kit


Description:

Price:

Single leveling valve

1,925.00

Dual leveling valves

2,050.00

LoadMaxx works on trucks with walking beam, Mack Camelback, and other mechanical drive suspensions as well as vehicles with air drive suspensions. Deflection sensors measure flex in the mechanical drive or steer suspension and air pressure sensors measure pressure in the air springs. The scale converts the sensor measurements into accurate on-the-ground weights. Properly calibrated and used, LoadMaxx is accurate to within 300 lbs on each axle group.

QuickLoad Tractor & Straight Trucks


Description:

Price:

Display Kit

340.00

Sensor Kit

130.00

QuickLoad is designed as a cost-effective on-board weighing solution for dedicated tractor trailer fleets and straight trucks with either air or leaf spring suspensions. For little more than the cost of a set of air gauges, QuickLoad provides accurate weights on an easy-to-read in-dash display. QuickLoad is ideal for owner operators and small fleets, because it is inexpensive, easy to install and use.  The QuickLoad Scale accurately measures and displays steer and drive axle group weights, GVW and net payload weights. Weight readings are conveniently displayed in pounds or kilograms and are accurate at all vehicle operating temperatures, humidity levels and altitudes. Warning and overweight alarms are standard from two separate outputs.  Installation consists of adding the display to the dash and connecting a power cable, sensors and sensor cables.

QuickLoad Trailer Scale


Description:

Price:

Nose mount – all types

525.00

Side mount – reefers and vans

495.00

Side mount – flatbeds and bulk trailers

485.00

Rear mount – bulk trailers

485.00

Inside frame rail mount – lowbed

485.00

Mounting bracket – flatbeds, lowboys

50.00

Mounting bracket – all others

43.00

Put an end to the guesswork. Air-Weigh’s QuickLoad Trailer Scale provides on-the-ground weights right at the loading site to let you load quickly and stay within safe, legal limits.  QuickLoad has all the precision you have come to expect from Air-Weigh, but is designed for applications that don’t require trailer weights in the cab. It’s an economical approach to trailer weighing that doesn’t skimp on premium features.  It’s hard enough to make a profit without the added hassles of check-weigh fees, out-of-route miles, overweight fines and wasted time reworking loads. With a touch screen display and built-in warning and overweight alarm LEDs, the driver- friendly QuickLoad Trailer Scale is simple to use and always reliable. Easy to install, the standalone QuickLoad Trailer Scale includes factory calibration for many popular suspension type.